EarthQuake CRT series Manual do Operador descarregar pdf (Página 11)

Operator’s Manual

Front Tine Tiller 3365 Series

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST

To prevent accidental starting:

Engine must be turned o and cool, and spark plug wire must

be removed and secured from spark plug before checking

and adjusting engine or equipment.

SERVICING THE ROTOTILLER

The following information will help you make the necessary checks

and perform the procedures required to follow the normal care

recommendations made for your rototiller unit.

If you prefer, your local authorized dealer can make these checks and

perform the required procedures for you.

MAINTENANCE AND STORAGE

MAINTENANCE SCHEDULE

Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you with years

of reliable operation.

Keepingyourtillerintoprunningconditionwillprolongitslife,andhelpyouobtainoptimumperformance.

Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.

Maintenance Operation Page

Before

Each Use

50 hours or

Every Season

Check belt tension 13 X

Change forward belt 13 X

Engine maintenance 14 X X

Check oil level/change oil 14 X 2

Clean tine axle shaft 14 X

Lubrication 14 X

Check throttle control adjustment - 1

EM = See engine manual

1 Adjust throttle control after rst three hours of operation or if engine is hard to start or run-on occurs.

2 Change oil after the rst ve to eight hours of use, then after every 50 hours or every season. Change oil

every 25 hours when operating under heavy load or in high temperatures.

WARNING

Important: Use only approved Ardisam spare parts.

spark plug wire

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sem comentários

EarthQuake CRT series Manual do Operador Página 11